Nikon G02 manual Inserting Batteries, EP-5B Power Connector

Inserting Batteries

The MB-D11 can be used with one EN-EL15 rechargeable Li-ion battery, or with six AA batteries.

Before inserting batteries, be sure that the camera is off and that the MB-D11 control lock is in the L position.

1Turn the MB-D11 battery-chamber latch toand remove the battery holder (Figure E).

En

2Ready the batteries as described below.

EN-EL15: Matching the indentations on the battery to the projections on the MS-D11EN holder, insert the battery with the arrow (▲) on the bat- tery toward the battery holder power terminals (Figure F- q). Press the battery lightly downward and slide it in the direction of the arrow until the power terminals click into place (Figure F- w).

AAbatteries: Place six AA batteries in the MS-D11 battery holder as shown in Figure G, making sure that the batteries are in the correct orienta- tion.

3Insert the battery holder in the MB-D11 and latch the battery-chamber cover (Figure H). Make sure the holder is fully inserted before turning the latch.

4Turn the camera on and check the battery level in the control panel or viewfi nder. If the camera does not turn on, check that the battery is cor- rectly inserted.

The EP-5B Power Connector

When using the EP-5B power connector, insert it into the MS-D11EN holder with the arrow (▲) on the connector toward the battery power terminals. Press the connector lightly downward and slide it in the direction of the arrow until the power terminals click into place (Figure I- q). Open the holder power connector cover and pass the EP-5B power cable through the opening (Figure I- w).

7