First Steps

Inserting the Batteries

1Open the battery-chamber/memory card slot cover.

•Before opening the battery-chamber/memory card slot cover, hold the camera upside down to prevent the batteries from falling out.

1

3

2

Steps First

2Insert the Batteries

•Confirm that the positive (+) and negative (-) terminals are oriented correctly as described on the label at the entrance of the battery chamber, and insert the batteries.

3Close the battery-chamber/memory card slot cover.

1

2

Applicable Batteries

•Four LR6/L40 (AA-size) alkaline batteries (batteries supplied)

•Four FR6/L91 (AA-size) lithium batteries

•Four EN-MH2 rechargeable Ni-MH (nickel metal hydride) batteries

Turning On and Off the Camera

After removing the lens cap, press the power switch to turn on the camera. The power-on lamp (green) lights for a moment, then the monitor turns on. Press the power switch again to turn the camera off. When the camera turns off, both the power-on lamp and monitor turn off. If the camera is turned off, hold down cto turn the

14camera on in playback mode (A26).