When using the self-timer, pictures are taken 10 seconds after the shutter-release button is pressed. When using the self-timer, use of a tripod is recommended. Set Vibration reduction (A103) in the setup menu (A92) to Off when using a tripod.
1Press n(self-timer) on the multi selector.
The self-timer menu is displayed.
2Press the multi selector Hor Ito select ON,
and press k.
The self-timer icon (n10) is displayed.
If a setting is not applied by pressing kwithin a few seconds, the selection is cancelled.
Self-timer
3Frame the picture and press the
shutter-release button halfway. | 10 |
Focus and exposure are set.
1/125 F3.5
4Press the shutter-release button the
The self-timer starts and the number of seconds remaining until the shutter is released is displayed in the monitor. The self-timer lamp blinks. The lamp stops blinking one second before the picture is taken and remains lit until the shutter is released.
When the shutter is released, the self-timer is set to OFF.
To stop the timer before a picture is taken, press the shutter-release button again.