Setup Menu

TV Settings

dbutton Mz(Setup menu) (A104) MTV settings

Adjust settings for connection to a television.

Video mode

Choose from NTSC and PAL.

HDMI

Select the HDMI output image resolution from Auto (default setting), 480p, 720p, and 1080i. When set to Auto, the resolution is automatically set to 480p, 720p, or 1080i according to high-definition television that is connected to the camera.

HDMI device control

Select whether or not the camera can receive signals from the TV when it is connected to an HDMI-CEC compatible television via an HDMI cable. When this is set to On (default setting), a TV remote control can be used to control the camera during playback. ➝ “Using a TV Remote Control (HDMI Device Control)” (A91)

DHDMI and HDMI-CEC

HDMI (High-Definition Multimedia Interface) is a multimedia interface. HDMI-CEC (HDMI-Consumer Electronics Control) allows compatible devices to inter-operate.

Blink Warning

dbutton Mz(Setup menu) (A104) MBlink warning

Set whether or not to detect human subjects with eyes closed when taking pictures using face detection (A24) in the following situations.

•G(Easy auto) mode

•Portrait (A36) or Night portrait (A37) scene modes

On

Setup Camera Basic

When the camera detects that one or more human subjects have closed their eyes shortly after detecting the faces and shooting them, the Did someone blink? screen will be displayed in the monitor. The face of the human subject that may have closed his/her eyes is framed by a yellow border. In such a case, you can check the captured image and determine if you take the picture again.

➝“Operating the Did someone blink? Screen” (A120)

Off (default setting)

 

Blink warning is disabled.

119