Shooting on More

Auto Mode

BNote on Multi-shot 16

Smear (A128) visible in the monitor when shooting with Multi-shot 16 will be visible in the saved image data. To reduce smear effects, avoid bright objects such as the sun, reflections of the sun, and electric lights when shooting.

ISO Sensitivity

A(auto) Md(Shooting menu) MISO sensitivity

When ISO sensitivity is increased, less light is needed when taking pictures. Higher ISO sensitivity allows darker subjects to be captured. Additionally, even with subjects of similar brightness, pictures can be taken at faster shutter speeds, and blurring caused by camera shake and subject movement can be reduced.

•Although higher ISO sensitivity is effective when shooting darker subjects, shooting without the flash, shooting with the camera zoomed in, etc., images may contain noise.

Auto (default setting)

Sensitivity is ISO 80 under normal conditions; when lighting is poor and the flash is off, the camera compensates by raising sensitivity to a maximum of ISO 800.

80, 100, 200, 400, 800, 1600, 3200, 6400

Sensitivity will be locked at the specified value.

•When ISO sensitivity is locked, Motion detection (A114) does not function.

The icon for the current setting is displayed in the monitor (A8). When Auto is selected, the Eicon is not displayed at ISO 80, but is displayed if the ISO sensitivity automatically increases to more than 80 (A30).

BNote on ISO Sensitivity

This feature cannot be used simultaneously with certain features. ➝ “Camera Settings that Cannot Be Set at the Same Time“ (A60)

B ISO 3200 and ISO 6400

 

When ISO sensitivity is set to 3200 or 6400, the available Image

 

mode settings are limited to M2048×1536, N1024×768, and

 

O640×480. The image mode indicator displayed while shooting

 

lights in red, and Xis displayed next to the ISO sensitivity indicator

3200

58 in the bottom left of the monitor.