Basic Camera Setup: The Setup Menu

kAuto Off

Press dM z(setup menu) (A 86) MkAuto off

When the camera is on and a period of time passes without any operations, the camera will enter the standby mode (A 15) to save power.

When the camera enters standby mode, the power-on lamp flashes. If no operations are performed within three minutes, the camera turns off.

Use this option to set the amount of time that passes before the camera enters standby mode.

Auto off

Choose the time allowed to elapse before the camera enters standby mode if no operations are performed from 30 s (default setting), 1 min, 5 min, and 30 min.

Sleep Mode

If On (default setting) is selected, the camera will enter standby mode when there is no change in the brightness of the subject, even before the time selected in the

auto off menu has elapsed. The camera will enter sleep mode after 30 seconds when Auto off is set to 1 min or less, or after 1 minute when Auto off is set to 5 min or more.

Shooting, Playback and Setup Menus

BNotes on Auto Off

The time allowed to elapse before the camera enters standby mode is fixed in the following cases:

While menus are displayed: 3 minutes

While slide show is in progress: Up to 30 minutes

CCanceling standby mode

Cancel standby mode and reactivate the monitor by pressing any of the following buttons.

Power switch

Shutter-release button

A button

• c button

99

 

Page 111
Image 111
Nikon COOLPIXL22BLK, L21, COOLPIXL22R KAuto Off, Canceling standby mode, Press dM zsetup menu a 86 MkAuto off, Sleep Mode