Basic Camera Setup: The Setup Menu
kAuto Off
Press dMz(setup menu) (A84) MkAuto off
When the camera is on and a period of time passes without any operations, the camera will enter the standby mode (A13) to save power.
When the camera enters standby mode, the
Use this option to set the amount of time that passes before the camera enters standby mode.
Auto off
Choose the time allowed to elapse before the camera enters standby mode if no operations are performed from 30 s (default setting), 1 min, 5 min, and 30 min.
Sleep Mode
If On (default setting) is selected, the camera will enter standby mode when there is no change in the brightness of the subject, even before the time selected in the auto off menu has elapsed. The camera will enter sleep mode after 30 seconds when Auto off is set to 1 min or less, or after 1 minute when Auto off is set to 5 min or more.
Menus Setup and Playback Shooting,
BNotes on Auto Off
The time allowed to elapse before the camera enters standby mode is fixed in the following cases:
•While menus are displayed: 3 minutes
•While slide show is in progress: Up to 30 minutes
CCanceling Standby Mode
Cancel standby mode and reactivate the monitor by pressing any of the following buttons.
•Power switch
•
•Abutton
• cbutton | 97 |
|