Problem | Cause/Solution |
|
|
|
|
|
|
| |
PictureProject does not start when | • Camera is off. |
| ||
camera is connected | • Batteries are exhausted. |
| ||
•USB cable is not correctly connected. 42
• Appropriate USB option is not | |
selected. | — |
•Camera is not registered in Device Manager (Windows only).
See the PictureProject reference man- ual (on CD) for further information.
Pictures not displayed on television | Choose correct video mode. | |
|
|
|
Format memory > Format | Batteries are low. | |
option not available |
|
|
Electronically Controlled Cameras
In extremely rare instances, unusual characters may appear in the monitor and the camera may stop functioning. In most cases, this phenomenon is caused by a strong external static charge. Turn the camera off, remove and replace the batteries, and then turn the camera on again. In the event of continued malfunction, contact your retailer or Nikon representative. Note that disconnecting the power source as described above may result in the loss of any data not recorded to internal memory or the memory card at the time the problem occurred. Data already recorded will not be affected.
Notes Technical
87