Nikon MB-D14 manual Using the Battery Pack, Attaching the Battery Pack

Using the Battery Pack

		Attaching the Battery Pack
		Before attaching the battery pack, be sure that the camera is off and that the MB-D14
En
		control lock (Figure A-		) is in the L position (the illustrations show the D600).
				!4
	1		Remove the contact cap (Figure A- q) from the battery pack.
	2		The contacts for the MB-D14 are in the base of the camera, where they are pro-
			tected by a contact cover. Remove the contact cover as shown in Figure B-qand
			place it in the contact cover holder on the MB-D14 (Figure B- w).

3Position the MB-D14, keeping the MB-D14 mounting screw (Figure C- w) aligned with the camera tripod socket (Figure C- q) and tighten the attachment wheel by rotating it in the direction shown by the LOCK arrow (Figure D). There is no need to remove the battery from the camera before connecting the MB-D14. At default settings, the battery inserted in the camera will be used only after the battery in the MB-D14 is exhausted. The Battery order option in the camera Custom Settings menu (Group d) can be used to change the order in which the batteries are used.

Be sure to place the camera contact cover in the contact cover holder and to keep the MB-D14 contact cap in a safe place to prevent loss.

APB-6D and PK-13 auto-extension ring are required when using PB-6 bellows fo- cusing attachment with the MB-D14.

Removing the Battery Pack

To remove the MB-D14, turn the cam- era off and set the control lock on the MB-D14 to L, then loosen the attachment wheel and remove the MB-D14. Be sure to replace the contact cover on the cam- era and the contact cap on the MB-D14 when the battery pack is not in use.

6