Basic Camera Setup: The Setup Menu

iSound Settings

Adjust the following sound settings.

Button sound

Turn button sound On (default setting) or Off. A beep will sound once when operations are completed successfully, twice when the camera acquires focus on the subject, and three times when an error is detected. Start-up sound will also play when the camera is turned on.

Shutter sound

Choose shutter sound from On (default setting) or Off.

kAuto Off

If no operations are performed for the selected length of time, the monitor will turn off and the camera will enter standby mode (A17) to reduce the drain on the battery. The power-on lamp will blink in standby mode. If no operations are performed for about another three minutes, the camera will turn off automatically. Press the shutter-release button halfway or the cbutton to exit standby mode. Choose the time allowed to elapse before the camera enters standby mode. The time options are 30 s, 1 min (default setting), 5 min, and 30 min.

Menus Setup and Playback Shooting,

BNotes on Auto Off

The time taken for the monitor to enter standby mode is as follows.

•Menus are displayed: three minutes

•Mode dial is set to G: three minutes

•Mode dial is set to H: three minutes

•Using voice recording: 30 seconds

•Slideshow playback: maximum of 30 minutes

•AC adapter is connected: 30 minutes

169