Nikon SB-24 instruction manual Automatic Balanced FILL-FLASH, FdJ

AUTOMATIC BALANCED FILL-FLASH

When the S8-24 is turned off and the scene's brightness is EV10 or higher, if the computer's multi-segment sensor detects that the central subject is darker than the surrounding area by at least 1.5EV, the viewfinder ready-light LED blinks, recom- mending that you should use flash to brighten the picture. (Note: the S8-24 must be turned off for this signal to operate. The LED will not blink with the S8-24 in ST8Y or ON mode.)

Set the camera for Program exposure control and the S8-24 for TTL exposure control. A balanced fill-flash picture will result, automatically. It'sthat easy.

When using the S8-24 or any other flash in the F-401 s/N4004s

Fd'J

®

hot shoe, built-in speedlight must remain in the down position. You cannot use both speedlights at the same time. Using the

S8-24 relieves the camera'spower supply from operating the built-in flash, and you can expect the camera's motor to be able to power more rolls of film .

0 .60.811.52 346 91318m

2 3 4 5 7 1015 20 304060 ft

zoo'l:1 mm F

56