Nikon SB-24 instruction manual Accessories for TTL Multiple Flash, SC-19 SC-18

ACCESSORIES FOR TTL MULTIPLE FLASH

TTL Remote Cord SC·17

For Programmed TTL auto flash operation or TTL auto flash operation when using the S8-24 off the Nikon F4-Series (with DP-20 or DA-20), F-801/N8008, F-501/N2020, F-401s/N4004s, F-301/N2000, FA, FE2 or FG camera, use coiled cord SC-17. The SC-17 provides automatic sync speed setting and the same ready-light view-finder indication as if the flash unit were directly mounted on the camera. SC-17 comes with two TIL multiple flash terminals and one tripod socket. The SC-17 is approx 1.5m (4.9 tt).

TTL Remote Cord SC·24

For TTL auto flash operation when using the S8-24 off the Nikon F4 camera fitted with either the 6X High-Magnification Finder DW-21 or Waist-Level Finder DW-20, use SC-24 instead of SC-17.

The SC-24 also comes with two TTL multiple flash terminals and one tripod socket. The SC-24 is approx. 1.5m(4.9ft).

TTL Multi·Flash Sync Cords SC·18 and SC·19

To connect the flash units for TTL multiple flash operation, use Sync Cord SC-18 or SC-19.

The SC-18 is approx. 1.5m (4.9ft) long; the SC-19, 3m (9.8ft) long.

TTL Multi·Flash Adapter AS·10

When using more than three flash units for TTL multiple flash operation, use the Multi-Flash Adapter AS-10, an adapter with three multiple flash terminals and one tripod socket. (Requires SC-18 or SC-19 for each flash use.)

SC-24

SC-19

SC-18

90