Nikon SB-24 instruction manual Manual Multiple Flash Photography

MANUAL MULTIPLE FLASH PHOTOGRAPHY

Connect S8-24 and other flash units via the S8-24'smultiple flash terminal, using optional Nikon Sync Cord SC-11 or SC-15. For correct exposure in manual multiple flash operation, be sure all flash units are set at manual flash mode.

Caution: To avoid damage to flash units or incorrect operation, never mix Nikon Speedlights with flash units of other manufacturers.

For multiple flash photography using Nikon F4 or F-801/N8008,if the electric current in the synchro circuit exceeds a certain level, you may not be able to take a second shot after taking the first shot. Take care that the combined total of the coefficients (numbers shown in parenthesis below) for all speedlight'sused at anyone time does not exceed 20 at 20°C/68°F (13 at 40°C/104°F).

S8-24 (1) S8-23 (4) S8-22 (6) S8-21 (4) S8-20 (9) S8-19 (2) S8-18 (16) S8-17 (4) S8-16 (4) S8-15 (4) S8-14 (1) S8-12 (1) S8-11 (1)

If you are unable to take a second shot, disconnect the master speedlight from the camera, or turn each of the speedlights off and on once. This resets the circuits so you can resume shooting.

91