Nikon SB-24 instruction manual 346 91318m, 60.8 1 1.5 2 3 4 6 9 1318 m, Zoo?1 ~mm

(Ill

-~l~ :DD

O. 0.811.52-------346 91318m

2 345 7101520304060ft

With other cameras:

(1)Push select button so " ISO" starts blinking in the LCD panel.

(2)While " ISO" is blinking, press the adjustment button T or • to set the film speed in use.

elf you do not press the adjustment button for approx. 8 seconds or more, "ISO" automatically stops blinking. To reactivate "ISO," press the select button again.

(3)When the desired film speed appears, press select button again to cancel blinking.

elf "ISO" stops blinking automatically, you do not need to press the select button again.

(Ill _.'!-J

SET '.-'1-'

0.60.8 1 1.5 2 3 4 6 9 1318 m

ISO -------IUU

2 345 7101520304060ft

3~ F-·:

zoo?:1 ~mm

-

fl~~1~~_~~~~~1

L!. , ~',.(~._~."..""".>:jjlll'" ,~

Except in Non-TTL Auto r.:.1 flash mode, the film speed is essentially just a number displayed in the LCD panel. This means that, even if the displayed ISO number is incorrect, as long all other camera and speedlight settings are correct, the subject will be correctly exposed, Therefore, the ISO setting cannot be used as an exposure compen- sation control. A separate exposure compensation control provides that opportunity.

21