Nikon SB 700, SB-700 user manual Tips on Speedlight Care and Reference Information

Problem	Cause	Solution	0
	The built-in wide panel	Remove the built-in
	is in use or the Nikon		E-14
Zoom head		wide panel or the Nikon
	Diffusion Dome is		E-9
position is not set		Diffusion Dome.
	attached.
automatically.
	Power zoom function	Activate the power	E-25
	is canceled.	zoom function.
	The distance between
	the master flash unit and
	the remote flash unit is
	too long, or there is an	Redo the setup of the	D-23
Remote flash unit	obstacle between them.
		master flash unit and	D-24
does not fire.	The light from the master
		remote flash units.	D-25
	flash unit does not enter
	the remote flash unit
	light sensor window for
	wireless remote flash.
The SB-700 does		• Replace the batteries
	Microcomputer may have	while the SB-700
not work properly.
	malfunctioned if this	is on.
	occurs even when fresh	• If the problem	B-8
Nonstandard	batteries are properly	continues, contact
display	installed.	your retailer or Nikon
		representative.
The SB-700 does	Thermal cut-out is active.	Wait until the SB-700	E-31
not operate.		cools down.

Tips on Speedlight Care and Reference Information

H

H–2