Nikon SB-700, SB 700 user manual Basic Operations

Basic Operations

This section covers basic procedures in i-TTL mode in combination with a CLS-compatible camera.

vNotes on continuous flash photography

• To prevent the SB-700 from overheating, allow it to cool down for at

Bleast 10 minutes after 15 times of continuous firing.

Operation

•When continuous flash firing is repeated in quick succession, the internal safety function adjusts the recycling time by up to

15 seconds. If flash firing continues, the thermal cut-out indicator appears on the LCD and all operations are suspended. (0E-31) Allow it to cool down for several minutes to disable this function.

•The conditions under which the internal safety function is activated differ depending on the temperature and the SB-700 flash output level.

B–7