Nikon SB-700, SB 700 user manual Correct exposure*1

Checking Status in Wireless Multiple Flash-unit Photography

D

Wireless Multiple Flash-unit Photography

Master	Remote flash unit
flash unit
			Speedlight status
Flash-ready	Flash-ready	Sound
indicator	indicator	monitor
			Insufficient flash output for
	Quickly	Three long	correct exposure*1
Blinks for			Underexposure due to insufficient
	blinks for	beeps for	flash output may have occurred.
approx.
	approx.	approx.	To compensate, use a wider
3 sec.
	3 sec.	3 sec.	aperture or higher ISO sensitivity,
			or move the flash unit closer to
			the subject and reshoot.
			• Auto aperture flash mode or
			non-TTL auto flash mode is
			set on the master flash unit.
			Change the flash mode to an
		High and	operable flash mode.
			• The remote flash unit light
		low tone	sensor has failed to receive the
Goes out	Quickly	beeps	command light from the master
and lights	blinks for	alternate	flash unit. This is because the
			light sensor cannot detect when
up when	approx.	for
			to stop firing in sync with the
ready to fire	6 sec.	approx.
			master flash unit, either due to a
		6 sec.	reflection from the remote flash
			unit itself or light from another
			remote flash unit that may
			have entered the light sensor
			window. Change the direction
			or position of the remote flash
			unit and reshoot.

D–28