Using the Quick Recycling Battery Pack SD-800

Use the provided quick recycling battery pack to install five batteries to shorten the recycling time (p. 19).

Notes on using the Quick Recycling Battery Pack SD-800

With the SD-800 attached, be sure to use five batteries.

Be sure to replace all five batteries, including the one in this pack and WARNING the four inside the SB-800, with fresh ones at the same time.

Do not mix battery brands or types, or use old with new batteries. Otherwise, the batteries may leak corrosive liquids, become hot, or explode.

This battery pack cannot be used when the Power Bracket Unit SK-6/SK-6A is attached to the SB-800.

Battery chamber lid

Battery chamber lid attachment index

Quick recycling battery pack lock switch

• The battery chamber lids for the SB-800 and SD-800 are identical.

Attaching the Quick Recycling Battery Pack SD-800

1 Slide the SB-800’s battery chamber lid in the direction of the arrow to open.

2 Push the battery chamber lid back in the direction of the arrow to remove it.

• The lid can be easily removed if pushed back past the perpendicular position.

64

Page 70
Image 70
Nikon SB-800 Using the Quick Recycling Battery Pack SD-800, Attaching the Quick Recycling Battery Pack SD-800