Nikon SB-800 Detaching the SD-800, Align the index mark on the SD-800’s battery, It into place

3 Install the batteries in accordance with the i and j marks, as shown.

4 Open the SD-800’s battery chamber lid to install an extra battery, following the i and j marks, as shown.

5 Close the battery chamber lid by sliding it into place while pressing down.

Index	6	Align the index mark on the SD-800’s battery
		chamber lid with the corresponding index mark on
		the SB-800 and attach the battery pack by sliding
		it into place.
		• Be sure to slide the battery pack until the SD-800’s
		lock switch clicks into place.

■■■ Detaching the SD-800.

Other functions

1 Push up the SD-800’s lock switch, then slide it to detach.

2 Insert one of	3 Insert the	4 Close the
the hinges of	other hinge,	battery
the SB-800’s	as shown.	chamber lid by
battery		sliding it into
chamber lid,		place while
as shown.		pressing down.

65