Nikon SB-800 instruction manual Installing the batteries, Usable batteries

1 Installing the batteries

1 Slide open the battery chamber lid in the direction of the arrow.

2 Install the batteries following the i and

jmarks as shown. Align the battery

chamber lid attachment indexes, then close the battery chamber lid by sliding it into place while pressing down.

vUsable batteries

Install four AA-type penlight batteries (1.5V or lower) of any of these types:

(1) Alkaline-manganese (1.5V) (2) Lithium (1.5V) (3) Nickel (1.5V)

(4) NiCd (rechargeable, 1.2V) (5) Ni-MH (Nickel Metal Hydride) (rechargeable, 1.2V)

•When replacing batteries, replace all four (or five when using the Quick Recycling Battery Pack SD-800) with fresh ones of the same brand.

•High-power manganese batteries are not recommended for use with the SB-800.

•Always carry extra batteries when traveling.

•For details on batteries, refer to “Notes on batteries” on page 115.

CAUTION!

•Do not use batteries not specified in this instruction manual, as this may cause them to explode, leak corrosive liquids, or catch on fire.

•Do not mix battery brands or types, or use old with new batteries. Otherwise the batteries may explode, leak corrosive liquids, or catch on fire.

•Do not recharge non-rechargeable batteries in a battery charger. Otherwise the batteries may leak corrosive liquids or generate heat.

tObtaining faster recycling times using 5 batteries

Use the provided Quick Recycling Battery Pack SD-800 to install five batteries to shorten the recycling time. See page 64 for more details.

18