Nikon SB-800’s available flash modes, Available flash modes Indicators, usable cameras

SB-800’s available flash modes

The SB-800’s available flash modes vary, depending on the cameras and lenses in use or the camera’s exposure mode. Using the TTL auto flash mode is recommended for normal flash photography.

■■■ Available flash modes (Indicators, usable cameras)

TTL auto flash mode
• i-TTL mode:	Do/D:
• D-TTL mode:	Do/D:

• TTL (film based) mode: Do/D:

Non-TTL auto flash mode

• Auto Aperture flash:	B (p. 38):
• Non-TTL auto flash:	A (p. 40):
Manual mode
• Distance-priority
manual flash:	p (p. 44):
• Manual flash:	G (p. 46):
• Repeating flash:	q (p. 48):

Cameras compatible with CLS, COOLPIX cameras compatible with i-TTL

Digital SLRs not compatible with CLS Cameras in Groups I to VI (No o appears with cameras in Groups III and IV while performing Balanced Fill-Flash)

Cameras compatible with CLS, digital SLRs not compatible with CLS, cameras in Groups I to II and COOLPIX cameras compatible with i-TTL

No limitation

Except D1X and D1H digital cameras. No limitation

No limitation

uMonitor Preflashes

The SB-800 fires a series of imperceptible Monitor Preflashes just before the flash fires to obtain information on the subject in these cases:

(1)when the SB-800 is used with cameras compatible with CLS, digital SLRs not compatible with CLS, cameras in Group I with a CPU lens, and COOLPIX cameras compatible with i-TTL, and flash mode is set to TTL auto flash, and

(2)when the SB-800 is used with cameras compatible with CLS with a CPU lens, and the flash mode is set to Auto Aperture flash.

Monitor Preflashes are fired instantaneously and cannot be differentiated from the main flash, but H appears on the LCD panel (using a single flash unit). However, for cameras in Group I, Monitor Preflashes are not fired when the SB-800’s flash head is adjusted to other than the horizontal/front or down to –7° position, or the camera’s flash sync mode is set to Rear-curtain sync, even when H appears on the LCD panel.

36