3.Installing the Transparency Unit
Step 1
Turn your scanner off, and unplug the power cord.
Step 2
Remove the document cover by lifting it up from the scanner to separate the guide posts from their receptacles.
Step 3
Position the hinge brackets of the transparency unit over the supporting posts on the scanner so that the posts fit into the holes in both hinge brackets.
Step 4
Gently slide the transparency unit so that the supporting posts move into the narrow sections of the holes.
Step 5
Insert screws into the center of each hinge bracket and tighten them down.
6 | Nikon Transparency Unit User’s Manual |
