4. Using the
Transparency Unit
Step 1
Turn on the scanner. The Power, Ready and
Option indicators should light.
Step 2
Raise the transparency unit and place a transparency on the scanner's document setting glass. Make sure that the transparency is placed within the area bordered by the green rulers.
Step 3
Lower the transparency unit.
The scanner is ready to scan transparencies after launching your scanning software. Be sure to select the transparency scan type from your software to scan transparencies.
Note: Before you use the transparency unit and the scanner, you need to install the application software and scanner software/ driver.
To protect your transparencies from distortion, use a Slide Holder. The holder's frame provides ample area for grasping the transparency without risking damage from fingerprints and surface scratches.
10 | Nikon Transparency Unit User’s Manual |
