1. Introduction

Bottom

Rear Foot (Left / Right) (→ page 23)

Adjustable Tilt Foot (→ page 23)

Adjustable Tilt Foot Button (→ page 23)

Lamp Cover (→ page 52)

Attaching the supplied carrying handle (VT695, VT595, VT590 and VT491 only)

You can carry the projector by attaching the supplied carrying handle securely to the projector.

To attach the supplied carrying handle, use a Phillips-head screwdriver and the supplied two screws.

Place a soft cloth on the working surface before turning the projector over to prevent scratching the top cover. Make sure that the carrying handle is attached with correct orientation as shown below.

Screw

Phillips-head screwdriver

(not supplied)

Carrying handle

CAUTION

When carrying the projector by the carrying handle, make sure the two screws that attach the carrying handle to the projector cabinet are tight.

4