Niles Audio MSU480 manual Volt Trigger Output, Installation

I N F R A R E D M A I N S Y S T E M U N I T

3-30V AC/DC

STATUS

IN

Figure 7

12 Volt Trigger Output

The Niles MSU480 provides a 12VDC output that can be trig- gered one of two ways:

1.The presence of status voltage on the 3-30V AC/DC status input jack or

2.Discrete infrared on and off commands.

The discrete on and off commands are available for download at: www.nilesaudio.com/techsupport. This output can be used to trigger any device that requires 12VDC to be activated. Examples include:

•Dropping a motorized screen

•Activating a television lift

•Turning on a voltage controlled switching device (e.g.: Niles AC-3 voltage controlled switched outlet).

Installation

Simply plug a cable with a 3.5mm plug (tip=positive, sleeve=ground) into the jack labeled “12VDC/200mA OUT- PUT”. Connect the other end of the cable to the device that will be triggered or activated (Figure 7).

13