Manuals / Niles Audio / Home Audio / Stereo Receiver

Niles Audio ZR-8630AVZR-8630AV manual Installation, Connections, Placement

Models: ZR-8630AVZR-8630AV

1 86
Download 86 pages 7.79 Kb
Page 46
Image 46

INSTALLATION

PLACEMENT

Place the ZR-8630AV on a flat, level surface such as a table or shelf, with its weight equally distributed on each of its four feet. Placing the weight of the amplifier on the rear or front panel for even an instant will result in damage to the amplifier's connectors and controls.

Like any high-fidelity component, the ZR-8630AV will last much longer if it has adequate ventilation for proper cooling. When you install the ZR-8630AV in a cabinet, either open the rear of the cabinet to admit fresh air for prop- er cooling (see Figure 28), or install two small “boxer fans” to provide continuous airflow in and out of the cabinet (see Figure 29). Place the ZR-8630AV so it has at least seven inches (18 centimeters) of free air space above it. If the amplifier is on a carpeted surface, place a board under its feet. Do not block the ventilation holes on the top and bottom of the ZR-8630AV.

Boxer Fan (55 CFM/1.6 m 3M) directly centered 7” (18 cm) on top of the ZR-8630AV.

Boxer Fan (55 CFM/1.6 m 3M) directly centered 2” (5 cm) behind the ZR-8630AV.

Make sure that there is a minimum of 7” (18 cm) of free air space above the amplifier and 3” (7.6 cm) on each side for pr oper ventilation.

CAUTION! When using low- impedance speaker loads (less than 8 ohms Nominal) refer to Figure 29 for proper placement.

Allow a minimum of 2” (5 cm) of depth behind unit to accommodate cables and connectors.

If the cabinet rear is not open to fresh air or if you’re using low-impedance loads, install two “boxer fans” to provide continuous air flow into and out of the cabinet.

Figure 28

Figure 29

CONNECTIONS

CONNECTING SPEAKER WIRE TO THE NILES NO-STRIP CONNECTOR

The ZR-8630AV features an award-winning, patented no-strip speaker-wire connector. Follow the steps below to connect the speaker wires to the connector and the connector to the ZR-8630AV.

1.Separate the speaker wire so at least two inches (five centimeters) of each conductor is free.

2.Open the no-strip connector by applying pressure to the red and black levers until you hear an audible “click.”

3.Insert the negative (–) unstripped wire fully into the speaker-wire hole next to the BLACK lever and the positive (+) unstripped wire into the speaker-wire hole next to the RED lever. Squeeze the RED and BLACK levers until you hear an audible “click,” indicating that the connector has locked onto the wire. (See Figure 30-A.)

4.Insert the no-strip connector into the corresponding zoned speaker- output socket on the rear panel of the ZR-8630AV. Push it down until it locks in place. The connector fits the socket in only one position. If the terminal does not insert completely, reverse the connector 180 degrees and re-insert. (See Figure 30-B.)

A

B

 

Figure 30

46

Page 45 Page 47
Page 46
Image 46
Niles Audio ZR-8630AVZR-8630AV manual Installation, Connections, Placement
Page 45 Page 47

ZR-8630AVZR-8630AV specifications

The Niles Audio ZR-8630AV is a sophisticated multi-room audio distribution system designed to deliver high-quality sound throughout your home. Ideal for both residential and light commercial applications, this system enables seamless integration of audio sources, providing a versatile solution for music lovers and entertainment enthusiasts alike.

One of the standout features of the ZR-8630AV is its ability to support eight zones, each of which can independently control audio playback. This flexibility allows users to customize their listening experience in various rooms, ensuring that everyone can enjoy their preferred music at their desired volume. The system can drive up to 30 watts of power per channel, making it suitable for a wide range of speakers, from low-impedance models to high-efficiency types.

The ZR-8630AV is equipped with advanced technology that enhances its performance. One of the key technologies is the proprietary Niles Intelli-Volume technology, which automatically adjusts volume levels based on the audio source and conditions. This feature ensures consistent sound quality across different zones, providing an optimal listening experience.

This audio distribution system also features a user-friendly, intuitive interface that simplifies operation. The built-in IR receiver allows for remote control from various devices, while the easy-to-navigate menu makes it simple to select sources and adjust settings. Additionally, the ZR-8630AV is compatible with third-party control systems, enhancing its integration capabilities in home automation setups.

Another notable characteristic is the ZR-8630AV's ability to connect multiple audio sources, including CD players, satellite receivers, and streaming services. This connectivity ensures users have endless options for their listening pleasure. It prominently features composite and optical digital inputs, making it versatile regarding the types of sources it can accommodate.

Moreover, the ZR-8630AV incorporates high-quality digital-to-analog converters, ensuring that sound reproduction remains pristine and true to the original recording. This focus on audio fidelity makes it a popular choice for audiophiles who refuse to compromise on sound quality.

In summary, the Niles Audio ZR-8630AV is a powerful multi-room audio distribution system that combines exceptional sound quality, advanced features, and seamless connectivity. Its ability to serve multiple zones in a unified manner, coupled with user-friendly controls and compatibility with various audio sources, positions it as a leading choice for anyone looking to create the perfect audio environment in their home.