PROGRAM EDITING STEPS
STORING TUNER PRESETS
Step 1- With the BAND SHIFT Button, select the desired tuner (Tuner 1 or Tuner 2) and band (AM or FM). The cycle is FM 1, AM 1, FM 2, AM 2.
Step 2 - Locate the desired station for preset using the STATION SCAN Buttons.
Step 3 - Press and hold the PRESET Button where you wish to store the desired station. The station display blinks when the station is stored to the PRESET Button.
PROGRAM ERASING
Erasing Individual IR Commands
Step 1. Follow the same steps as you would to pro- gram the IR command that you wish to erase.
Step 2. When the ENTER IR LED lights (prompting you to teach an IR command), tap the ERASE button instead. This erases the previously stored command.
Step 3. Continue programming, or tap the PROGRAM button to exit the programming mode.
Erasing Individual Sequences
Step 1. Follow the same steps as you would to pro- gram the sequence that you wish to erase.
Step 2. When the ENTER IR LED lights (prompting you to enter the IR commands and/or delays for the sequence), press and hold the ERASE button instead. This erases the previously stored sequence.
Step 3. Continue programming, or tap the PROGRAM button to exit the programming mode.
Erasing all IR Commands and Sequence Programming for Only One Source
Step 1. During normal programming, and while the LED for the source you wish to erase is lit, press and hold the PROGRAM and ERASE buttons until the POWER OR DISCRETE “ON” LED, the IR COMMANDS LED, and the SEQUENCE LED all blink.
Step 2. Release the PROGRAM and ERASE buttons to erase all programming for the selected source.
Step 3. Continue programming, or tap the PROGRAM button to exit the programming mode.
Erasing All Programming
Step 1. During normal programming, press and hold the PROGRAM, NEXT, and ERASE buttons until the PROGRAM LED, the POWER OR DISCRETE “ON” LED, the IR COMMANDS LED, and the SEQUENCE LED all blink.
Step 2. Release the PROGRAM, NEXT, and ERASE buttons to erase all programming for the entire system.
Step 3. Continue programming, or tap the PROGRAM button to exit the programming mode.
71
