Niles Audio ZR-8630AVZR-8630AV manual Enter IR Discrete OFF

SYSTEM PROGRAMMING STEPS

Step 6 - Press the NEXT button.

			RED LED GREEN LED
ENTER	PROGRAM	NEXT	1	TUNER 2
						POWER OR
IR			3 SOURCE 4
			5	SOURCE 6	POWER	DISCRETE "ON"
						IR COMMANDS
			7	SOURCE 8		DISCRETE "OFF"

ENTER	PROGRAM	NEXT
IR

The ENTER IR	The DISCRETE “OFF”	The IR COMMANDS
light turns off.	LED turns OFF.	LED blinks RED.

Step 7 - On the Niles R-8 Remote, press a Function Button that corresponds to the Source 3 IR command you wish to teach.

The ENTER IR LED lights RED.

			RED LED GREEN
ENTER	PROGRAM	NEXT	1	TUNER 2
IR			3 SOURCE 4
			5	SOURCE 6
			7	SOURCE 8

Step 8 - Teach the Source 3 IR command.

The ENTER IR LED turns OFF.

Immediately after capturing the IR command, test it by pressing the TEST IR button.

			RED LED GREEN LED
ENTER	PROGRAM	NEXT	1	TUNER 2			TEST IR
						POWER OR
IR			3 SOURCE 4
			5	SOURCE 6	POWER	DISCRETE "ON"	SEQUENCE
						IR COMMANDS
			7	SOURCE 8		DISCRETE "OFF"

If the source component does not respond correctly to the IR command, press again the same Function Button on the Niles R-8 Remote.

The ENTER IR LED lights RED. Reteach the command and test again. If the source component still does not respond cor- rectly, try reteaching the command at various distances from a half-inch (roughly a centimeter and a quarter) to three feet (almost a meter). If it still doesn’t work, see Alternate IR Learning Mode on page 68.

Step 9 - Repeat Steps 7 and 8 until you have taught all commands for Source 3.

66