Nilfisk-Advance America IVB 7-H, IVB 3-H After finishing work, Maintenance plan, As required

IVB 3-H IVB 5-H IVB 7-H

english

6 After finishing work

6.1Switching the vacuum cleaner off and storage

	IVB 3-H
2	1
IVB 5-H	IVB 7-H

1.After picking up hazardous dust, vacuum clean the out- side of the cleaner.

2.Switch off the vacuum clean- er and pull the mains plug out of the socket.

3.Remove the suction hose form the vacuum cleaner and close the inlet fitting (1) with the plug (2).

4.Wind up the power cord and hang it on the handle.

5.Empty the tank and clean the vacuum cleaner.

6.After picking up liquids: Store the upper section of the cleaner separately so that the filter element can dry.

7.Store the vacuum cleaner in a dry room where it is protected from unauthorized use.

7 Maintenance

7.1	Maintenance plan
			After finishing work	As required
7.2.1		Replacing the waste bag		
7.2.2		Replacing the safety filter bag		
7.2.3		Replacing filter element „H“ (IVB 3-H)		
7.2.4		Replacing filter element „H“ (IVB 5-H/7-H)		
7.2.5		Emptying dirt tank (IVB 3-H/IVB 5-H)	
7.2.6		Emptying dirt tank (IVB 7-H)	

7.2Maintenance work 7.2.1 Replacing the waste

bag

Only after picking up harmless dust.

1

2

IVB 3-H/IVB 5-H:

1.Open the retaining clamps and remove the upper sec- tion of the cleaner from the dirt tank.

2.Carefully remove the waste bag connection (1) from the inlet fitting.

3.Close the waste bag connec- tion with the slide (2).

4.Close the waste bag using the cable binder (3).

10