Nilfisk-Advance America IVB 7-H Connecting electrical, Ensure that the electrical, appliances

4.1.3 Connecting electrical	To comply with regulations, only ap-	1.	Ensure that the electrical
appliances	proved dust producing tools should		appliance is switched off.
	be connected.	2.	Connect the electrical appli-
	The maximum power consumption
			ance to the appliance socket
	of the connected power tool is stat-

ed in section 9.4 “Technical data”. on the control panel.

IVB 3-H IVB 5-H IVB 7-H

english

4.2Switching on the vacuum cleaner

4.2.1 Switch position “I”

The hose diameter and the setting for the suction hose diameter must be the same.

Hose Hose diameter

øsetting

ø27	ø27
ø32	ø32
ø38	ø38
ø50	ø50

3	2
0
7
2
0

0

3 6

0 5 0

1. Turn the switch to position „I“.

The vacuum cleaner motor starts.

4.2.2 Switch position „auto“

The hose diameter and the setting for the suction hose diameter must be the same.

Hose Hose diameter

øsetting

ø27	ø27
ø32	ø32
ø38	ø38
ø50	ø50

4.2.3 Suction power control

	2	0
3		3
0
7		0
2		5
0		0

	2	0
3		3
		6
0
7		0
2		5
0		0

Before switching the switch to position „auto“, ensure that the tool connected to the appliance socket is switched off.

1.Turn the switch to position „auto“. The vacuum cleaner mo- tor starts when the connected appliance is switched on.

2.When the power tool is switched off the vacuum cleaner contin- ues to run for a short moment so that any dust in the suction hose is conveyed to the safety filter bag.

The motor speed and the suc- tion power can be varied with the suction power control. This allows precise adaptation of the suction power for different cleaning tasks.

4.3 Check volume flow	Before picking up dust with maxi-
	mum room concentration values:
monitor

1.Check that all the filters are present and properly fitted.

2.When the motor is running, hold the suction hose shut. An acoustic warning sounds after approx. 1 second.

07