Nilfisk-Advance America IVB 3-H, IVB 5-H manual IVB 7-H, 7.2.2Replacing the safety filter bag

3

5.Dispose of the dirt in accord- ance with legal regulations.

6.Insert a new filter bag into the cleaned tank as described in the instructions enclosed.

IMPORTANT:

Press the filter bag connection firmly on to the inlet fitting.

IVB 3-H IVB 5-H IVB 7-H

english

		IVB 7-H:
	2	1.	Remove the upper section of
		2.	cleaner from the dirt tank.
			Open the retaining clamps
1	1		(1) and remove the interme-
			diate ring (2) from the tank.
	3	3.	Close the waste bag using
			the cable binder (3).
		4.	Dispose of the dirt in accord-
			ance with legal regulations.
		5.	Insert a new filter bag into the
			cleaned tank as described in
			the instructions enclosed.
			IMPORTANT: Press the filter
			bag connection firmly on to
			the inlet fitting.

7.2.2Replacing the safety filter bag

During the following work, en- sure that dust is not unnecessarily spread around. Wear a P2 breath- ing mask.

1

2

3

1.Clean the filter element (see 4.5 and 4.6).

2.Switch off the vacuum clean- er and wait approx. 5 minutes so that the dust can settle in the tank.

3.Open the retaining clamps and remove the upper sec- tion of the cleaner from the dirt tank.

4.Remove the filter bag con- nection (1) from the inlet fit- ting.

5.Close the safety filter bag connection (2) with the slide.

6.Remove the plastic sleeve from the tank rim and close it using a cable binder (3).

7.Remove the safety filter bag from the tank and dispose of it in accordance with legal regulations.

8.Insert a new safety filter bag

into the tank according to the instructions (in the filter bag packaging).

IMPORTANT:

Press the filter bag connection on the inlet fitting as far as pos- sible.

11