3.4Mounting of quick coupling

3.5Mounting of high pressure hose

Nilfisk P 130.2 / P 150.2 / P 160.2

 

1. Screw the quick coupling

EN

tight on to the water inlet (2).

 

Note: The inlet fi lter must al-

 

ways be fi tted in the water inlet

 

pipe to filter out sand, limestone

 

and other impurities as these

 

will damage the pump valves.

 

Caution: Failure

 

to fi t the fi lter will

 

invalidate the

 

guarantee.

 

Attach the high pressure hose

 

(4) to the spray handle (7).

 

Detach the high pressure hose

 

by pressing the pawl.

 

4 Operating your pressure washer

4.1Connection of high pres- sure hose

Machines without hose reel: At- tach the high pressure hose (4) to the high pressure connection of the machine (3).

Only max. 7 m additional exten- sion hose can be added.

Machines with hose reel: Un- wind the high pressure hose completely.

7

Page 7
Image 7
Nilfisk-Advance America P 160.2 Operating your pressure washer, Mounting of quick coupling Mounting of high pressure hose