Nilfisk P 130.2 / P 150.2 / P 160.2
EN | 4.2 Mounting of spray |
| lance and nozzles |
1. Push the spray lance (6) into the spray handle (7) and twist it until the bayonet coupling locks into position.
2. Attach the nozzle.
4.3 Water connection | An ordinary 1/2" garden hose of |
| min. 10 m and max. 25 m will |
| be suitable. |
NOTE: Connec- tion to the public mains according to regulations.
4.4 Telescopic handle
IMPORTANT! Only use wa- ter without any impurities. If there is a risk of silt, sand or sediment in the inlet water (i.e. from your own well), an addi- tional filter should be mounted.
1.Let the water run through the water hose before connecting it to the machine to prevent sand and dirt from penetrat- ing the machine.
Note: Check that the filter is
fitted in the water inlet pipe and that it is clean and free from debris.
2.Connect the water hose to the water supply by means of the quick connector (inlet water, max. pressure: 10 bar, max. temperature: 60°C).
3.Turn on the water.
The machine features a tele- scopic handle. To raise or lower the handle, press the button
(16)and move the handle up- wards or downwards. When a click is heard, the handle is in right position.
8
