ATTIX 9 H/M

7.2.3Replacing the safety filter bag

During the following work, en- sure that dust is not unnecessarily spread around. Wear a P2 breath- ing mask.

B

C

G

A

A

D

E

F

B

1.Switch off the vacuum clean- er and pull the mains plug out of the socket.

2. Apply

 

parking

brakes

(A)

on

both

castors.

Removing the safety filter bag:

3.Swing the bar (B) upwards.

4.Use the handle (C) to pull the dirt tank out of the vacuum cleaner.

5.Close the disposal bag with string (D) and remove it from the dirt tank.

WARNING! If heavy dirt has been picked up, never lift the dirt tank alone. Use the FORKLIFT (E), which is available as an accessory.

6.Use a crane or fork lift truck to position the FORKLIFT above the dirt tank.

7.Attach the tank to the acces- sory.

8.Dispose of the dirt in accord- ance with legal regulations.

Inserting the safety filter bag:

9. Clean the dirt tank.

10.Check the seals (F) between the tank and the upper sec- tion of the vacuum cleaner.

11.Insert the safety filter bag (G) in the dirt tank.

12.Fold the top edge of the dis- posal bag over the rim of the dirt tank.

13.Push the dirt tank as far as possible into the vacuum cleaner.

14.Swing the bar (B) down- wards without forcing it.

1) Optional accessories / Option depending on model

23

Original Instructions

 

Page 24
Image 24
Nilfisk-ALTO ATTIX 965-2H/M SD XC, ATTIX 965-0H/M SD XC Replacing the safety filter bag, Removing the safety filter bag