This document
This document contains the safety information relevant for the appliance along with a quick start guide.
Prior to using the appliance for the first time, be sure to read this document through and keep it ready to hand.
Further support
Detailed information on the appliance can be found in the operating instructions, which you can download from our web site at
For further queries, please contact the Nilfisk service representative responsible for your country. See reverse of this document.
Important safety instructions
the appliance must
only be used by persons, who have been instructed in its correct usage and explicitly commissioned with the task of operating it only be operated under supervision
not be used by children
High pressure hoses and couplings are safety relevant. Only use parts recommend- ed by the manufacturer
Oil- or gas heated machines must be placed in well ventilated areas
Purpose and intended use
This high pressure washer has been designed for professional use in:
-Agriculture, industry, transport industry, automotive cleaning, municipal facilities, cleaning trade, construction industry, food industry etc.
Any other use is considered as improper use. The manufacturer accepts no liability for any damage resulting from such use. The risk for such use is borne solely by the user. Proper use also includes proper operation, servicing and repairs as specified by the manufacturer. See operating instructions.
Transport
1.For safe transport in and on vechicles we recommend to prevent the equipment from sliding and tilting by fixing it with belts
2.Transport (when tilted):
-Unplug the machine before tilting it.
-Do not tilt the machine on the front.
3.When transported at or below 0°C, pour
Storage
Store the appliance in a dry place, protect- ed from frost.
NEVER
Before use
Before starting up your machine, please check it carefully for any defects. If you find any, do not start up your machine. Contact your Nilfisk distributor.
Especially check:
High pressure hose and spraying pistol. The insulation of the electric cable should be faultless and without any cracks. If the electric cable is damaged, an authorized Nilfisk distributor should replace it.
Water connection
1.Never operate the cleaner without water. Even brief shortages of water result in severe damage to the pump seals.
2.To connect the appliance use a textile- reinforced water hose with a nominal diameter of min. 3/4” (19mm).
3.Observe required water quantity and water pressure.
4.In the case of poor water quality (sand, etc.) add a water filter to the machine.
5.Rinse the water supply hose briefly in or- der to prevent sand and other dirt particles entering into the machine.
General
Use of the high pressure cleaner is subject to the applicable local regulations.
Besides the operating instructions and the bind- ing accident prevention regulations valid in the country of use, observe recognised regulations for safety and proper use.
Mains power connection
The following should be observed when connecting the high pressure washer to the electric installation:
Only connect the machine to an installation with earth connection.
The electric installation shall be made by a
5
