Nilfisk-ALTO NEPTUNE 2 Extension cables, During operation, Repair and maintenance, Safety devices

Models: NEPTUNE 2

1 68
Download 68 pages 30.81 Kb
Page 6
Image 6
Extension cables

certified electrician.

According to IEC 60364-1 it is strongly rec- ommended that the electric supply to this machine should include a residual current device (GFCI).

Extension cables

Inadequate extension cables can be danger- ous. Cables on drums should always be com- pletely unwinded to prevent the cable from overheating. Extension cables should be of a watertight construction and comply with the below-mentioned requirements for length and cable dimensions.

Cable length

Cross section

 

< 16 A

< 25 A

up to 20 m

1.5 mm2

2.5 mm2

20 to 50 m

2.5 mm2

4.0 mm2

Cable connections should be kept dry and off the ground.

During operation

High pressure jets can be dangerous. Ne- ver direct the water jet at persons, pets, live electrical equipment or the machine itself.

Never try to clean clothes or footwear on yourself or other persons.

The operator and anyone in the immediate vicinity of the site of cleaning should take action to protect themselves from being struck by debris dislodged during operation. Wear goggles during operation.

Do not cover the machine during operation. Never use the machine in an environment where there could be a danger of explosion. If any doubt arises, please contact the local authorities.

It is not allowed to clean asbestos- containing surfaces with high pressure. This high pressure washer must not be used at temperatures below 0°C.

Only use correct fuel as specified. Improper fuels can cause severe hazard.

Repair and maintenance

Always remove the electric plug from the socket before carrying out maintenance work on the machine.

Safety devices

Locking device on spray gun:

The spray gun features a locking device. When the pawl is activated, the spray gun cannot be operated.

Thermal sensor:

A thermal sensor protects the motor against overloading. The machine will restart after a few minutes when the thermal sensor has cooled.

Pressure safety device

An integrated hydraulic safety valve protects the system from excessive pressure.

Thermal safety device:

A thermal safety device placed in the chim- ney protects the machine from overheating. The safety device must only be replaced by a Nilfisk-ALTO technician.

Guarantee

Our general conditions of business are applica- ble with regard to the guarantee. Unauthorised modifications to the appliance, the use of incorrect accessories, spare parts and cleaning chemicals in addition to using the appliance in a way other than for the intended purpose exempt the manufacturer from any liability for the resulting damage.

Recycling the washer

Make the old cleaner unusable immediately.

1.Unplug the cleaner

2.Cut the electric cable.

3.Do not discard electrical appliances with household waste.

As specified in European Directive 2002/96/EC on old electrical and electronic appliances, used electrical goods must be collected separately and recycled ecologically. Contact your local authorities or your nearest

dealer for further information.

Quick start guide

Pages 2 – 4 feature a pictorial quick reference guide, which is designed to help you when starting up, operating and storing the appli- ance. This quick start guide does not replace the separate operating instructions, which describes the appliance in detail. The operating instructions also contain further information on the operation, maintenance and repair of the appliance.

6

Page 6
Image 6
Nilfisk-ALTO NEPTUNE 2 Extension cables, During operation, Repair and maintenance, Safety devices, Guarantee, 25 A