Nimbus Water Systems MN-800-TF manual

CONCENTRATE RECIRCULATION VALVE: A needle valve that controls the amount of concentrate from the desalinator array to be recirculated back into the feed stream. This feature allows for higher recovery rates. Additionally, adjustment of this valve regulates the pump discharge pressure.

FLOW CONTROL: A fixed orifice that controls the amount of water flowing across the membrane to drain.

PRODUCT WATER CHECK VALVE: A one-way valve that prevents pressurized product water from flowing back into the desalinator (and possibly damaging the membrane) when the system is off. There is a check valve in the product line for each desalinator.

SYSTEM PRESSURE GAUGE: A glycerin filled gauge that displays the operating pressure in the desalinator.

TANK PRESSURE GAUGE (Option): A gauge that displays product water pressure when using a pressurized storage tank.

WATER SUPPLY PRESSURE GAUGE: A gauge that displays the water pressure of the feed water source.

FILTER PRESSURE GAUGE: A gauge that displays the water pressure after the carbon cartridge pre-filter. This is used to observe the pressure drop through the sediment pre-filter (a means of detecting filter clogging or loading).

LOW PRESSURE SWITCH: An electrical switch that shuts off the unit in the event of low feed water pressure. This is used as a pump protection device. This is factory set to cut off at 12 psi (0.8 bar). This switch is the one mounted on the manifold and behind the sediment pre-filter.

TANK PRESSURE SWITCH: An electrical switch, used with a pressurized storage tank that controls the system operation based on the storage tank pressure. This is factory set to shut the system off when the tank pressure is 60 psi (4.1 bar) and turn the system on when the tank pressure is below 40 psi (2.8 bar). This switch is the one mounted on the manifold and behind the carbon post-filter.

PRE-FILTER CARBON CARTRIDGE ASSEMBLY: A 20” 10 micron filter that reduces chlorine in the feed water.

POST-FILTER CARBON CARTRIDGE ASSEMBLY: A 20” 10 micron carbon cartridge filter that helps remove bad taste and odor. This filter is used with pressure storage systems. A tank pressure switch and check valve are always included with operation with a pressure tank storage system.

POST-FILTER ASSEMBLY: A 10” housing. This filter is used with a Calcite element to neutralize the pH of the product water.

TANK PRESSURE RELIEF VALVE: This valve limits the product pressure tank to 80 psi as a precaution.

MN-800-TF specifications

The Nimbus Water Systems MN-800-TF is an innovative water filtration system designed to provide homes with clean, safe, and great-tasting water. Emerging as a leading solution in the water purification market, the MN-800-TF stands out due to its advanced features and cutting-edge technologies that cater to diverse filtration needs.

One of the main features of the MN-800-TF is its multi-stage filtration process, which includes a combination of sediment filters, activated carbon, and reverse osmosis membranes. This multi-tier approach ensures that a wide range of impurities such as chlorine, heavy metals, sediments, and even microorganisms are effectively removed from the water. This results in not only improved taste but also enhanced safety for household consumption.

The system utilizes advanced filtration technologies, including a high-capacity reverse osmosis membrane that boasts an impressive rejection rate for dissolved solids. This technology ensures that the water retains essential minerals while eliminating harmful contaminants. The activated carbon filters are designed to reduce chlorine levels and volatile organic compounds, resulting in water that is pure and refreshing.

In terms of user convenience, the MN-800-TF is equipped with an easy-to-read digital display that provides real-time information regarding filter status and water quality. The system also features a simple, intuitive setup process and space-saving design, making it suitable for both small and large homes. The compact design allows for installation under sinks or in utility rooms, optimizing space without compromising efficiency.

Another notable characteristic of the MN-800-TF is its sustainable approach. The system is designed to produce minimal wastewater during the filtration process, which is a critical consideration given the rising concern over water conservation. Moreover, by using a reusable filter system, users can reduce plastic waste generated from traditional bottled water usage.

The Nimbus Water Systems MN-800-TF is also backed by robust customer support and a warranty, ensuring peace of mind for users. Overall, this water filtration system integrates advanced technology and user-friendly features, making it an optimal choice for anyone looking to enhance their home’s water quality. With its combination of efficiency, sustainability, and reliability, the MN-800-TF truly embodies the future of home water purification.