Connecting the Mediamaster
Connecting a video recorder with SCART
•Remove the aerial lead from your TV and connect this to the TV AERIAL input socket on the Mediamaster.
•Connect a SCART cable between the main SCART socket on the TV and the TV SCART socket on the Video.
•Connect an RF cable from the TV/VCR output on the Mediamaster to the RF input socket on the video.
•Connect an RF cable from the TV/VCR output on the video to the RF input socket on the TV.
•Connect a SCART cable between the SCART socket on the video and the SCART socket on the Mediamaster.
•Switch on your TV, plug in and switch on your Mediamaster.
•On your VCR there should be an AV select button. This should be selected to record Digital TV.
You may need to select the AV ( SCART ) channel on your TV. In some cases your TV will automatically select this channel when the Mediamaster is switched on.
Note: In this set up your VCR has to be on or in standby to watch digital TV. To record a digital channel you will need to select the AV ( SCART ) channel on your video.
It is always advisable to consult your video and TV instruction books.
RF
video
RF
SCART
Connecting a video recorder without SCART
•Remove the aerial lead from your TV and connect this to the TV AERIAL input socket on the Mediamaster.
•Connect an RF cable from the TV/VCR output on the Mediamaster to the RF input socket on the video.
•Connect an RF cable from the TV/VCR output on the video to the RF input socket on the TV.
•Switch on your TV and plug in and switch on your Mediamaster.
•Pick a spare channel on your VCR and tune this into the Media- master. Store this channel.
•Select this channel on your video when you want to record a dig- ital channel.
RF
video
GB 9
