Nokia 1315 Save voice mail dialing code, Write down number and process, Insert dialing codes

M e s s a g e s

messages > Listen to voice messages.

When you connect and the prerecorded greeting begins, follow the automated instructions to listen to your voice messages.

Save voice mail dialing code

You can insert special characters, known as dialing codes, into phone numbers such as voice mail, and save the number to a speed dial location. Dialing codes instruct the receiving system to pause, wait, bypass, or accept the numbers that follow them in the dialing string.

Voice mail is a network service. The following instructions are examples of common operations. Please check with your service provider for specific instructions for using your voice mail service.

Write down number and process

1.Write down your voice mailbox number.

2.Call and check your voice mail as you normally would.

3.Write down your interaction with the recorded prompts step-by-step. Note that each voice mail service may vary.

Your steps may resemble the following:

Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, and press

*.

Be precise; you will need this information in “Set up voice mail with dialing codes”, page 37.

Insert dialing codes

Press * repeatedly to cycle through dialing codes. When the desired code appears in the display, pause briefly and the code is inserted into the dialing string.

The following dialing codes are available:

Dialing Indicates...

code

*Bypasses a set of instructions.

+Causes the international access code to be replaced by +.

pPauses for 2.5 seconds before sending any numbers that follow.

wWaits for you to press the call key before sending the numbers or codes that follow.

36Copyright © 2006 Nokia. All rights reserved.