Nokia 1315 manual Access codes, Change the security code, PIN code

S e t t i n g s

1.Select Menu > Settings > Security settings > Security level.

2.Enter the security code, and select OK.

3.Select one of the following options:

None — Deactivate the security level settings.

Memory — Set the phone to ask for the security code when the UIM card memory is selected, when you change the memory in use, or copy from one memory to another.

Phone — Set the phone to ask for the security code whenever a new UIM card is inserted into the phone.

4.Select Select to confirm the activation.

Access codes

Change the security code

The security code controls access to features and is supplied with the phone. The preset security code is 12345. After you change the security code, keep the new code secret and in a safe place separate from your phone.

Avoid using codes similar to emergency numbers such as 911 to

prevent accidental dialing of the emergency number.

If you enter the wrong security code five times in succession, you will not be able to enter a code for 5 minutes, even if you power off the phone between incorrect entries.

1.Select Menu > Settings > Security settings > Access codes > Change security code.

2.Enter the current security code (default is 12345), and select OK.

3.Enter the new security code (up to 10 characters), and select OK.

4.Enter the new security code again, and select OK.

PIN code

The PIN code protects the UIM card from unauthorised access. The PIN code must be obtained from your wireless service provider. The PIN code is typically provided with your UIM card. The PIN code can be 4-8 digits in length. After three successive incorrect entries the PIN code is blocked. You are asked to enter the personal unblocking key (PUK) code. See “PUK code”, page 55 for more information.

54Copyright © 2006 Nokia. All rights reserved.