Set up your phone
16
1. Plug the headset connector into the
Pop-Port™ connector at the bottom
endof your phone. appears in the
standby mode.
2. Position the headset on your ear.
With the headset connected, make,
answer, and end calls as usual.
• Use the keypad to enter numbers.
• Press the call key to place a call.
• Press the end key to end a call.
■Change the Xpress-on™ covers
Note: Always switch off the power, and disconnect the charger and any
other device, before removing the cover. Do not touch electronic
components while changing the covers. Always store and use the device
with the covers attached.
To change the Xpress-on covers, first remove the back cover and battery.

Remove the front cover

Gently pull the bottom of the front cover
away from the rest of the phone.

Install the keymat and

front cover

1. Remove the keymat from the old
frontcover.