Nokia 2125i manual Automate voice mail, Set up voice mail with dialing codes, Insert dialing codes

M e s s a g e s

Automate voice mail

Special characters, called dialing codes, can be added to phone numbers. Dialing codes instruct the receiving system to pause, wait, bypass, or accept the numbers that follow them in the dialing string. See "Insert dialing codes," p. 36.

Voice mail services vary by service provider. The following instructions are examples of common operations. Please check with your service provider for specific instructions for using your voice mail service.

Set up voice mail with dialing codes

1.Write down your voice mailbox number.

2.Call and check your voice mail as you normally would.

3.Write down your interaction with the recorded prompts step-by-step. Keep in mind that each voice mail service may vary. However, it should be similar to the following:

Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, press #.

4.In the standby mode, select Contacts > 1-touch dialing.

5.Scroll to an (empty) 1-touch dialing slot and select Assign.

6.Enter your voice mailbox number, including the area code.

7.Enter any dialing codes as necessary using the information that you wrote down.

If you pause for 5 seconds after connecting to voice mail, enter p twice after the voice mailbox number; for example, 2145551212pp.

8.Enter any remaining pauses or other information that allows you to listen to your messages, and select OK.

9.Enter a name (such as voice mail), and select OK.

To dial and listen to your voice mail, in the standby mode, press and hold the assigned 1-touch dialing key.

Insert dialing codes

Press * repeatedly to cycle through the dialing codes. Once the desired code appears in the display, pause briefly. The code is inserted into the dialing string.

The following dialing codes are available:

*—Bypasses a set of instructions

+—International prefix

36