O r g a n i z e r
Stop the timer
After you have set the timer, you can stop the timer at any time.
In the standby mode, select Menu > Organizer > Countdown timer > Stop timer.
■Stopwatch
Your device has a stopwatch that displays time in hours, minutes, seconds, and fractions of a second in hh:mm:ss:s format.
Using the stopwatch or allowing it to run in the background when using other features increases the demand on battery power and reduces the battery life.
Measure time
1.In the standby mode, select Menu > Organizer > Stopwatch > Split timing or Lap timing > Start. The running time is displayed on the screen.
2.Select Split to note the lapsed time.
The timer continues to run. The split time appears below the running time. If you split the time more than once, the new measured time appears at the beginning of the list. Scroll to see previous measured times.
3.Select Lap to note the lap time.
The clock stops, then starts immediately from zero. The lap time appears below the running time. If you take more than one lap time, the new measured time appears at the beginning of the list. You can scroll to see previous measured times. When you select Stop, the total time appears at the top.
4.Select Stop to end the timing. The total time is displayed on the screen.
5.Select Options > Save to save the split or lap time.
6.Enter a name for the measurement, and select OK. If you do not enter a name, the total time is used as the default title for the time.
Operation note
If you press the end key and return to standby mode, the clock continues to run in
the background and 
appears in the upper left corner of the screen. To return to the stopwatch screens:
1.In the standby mode, select Menu > Organizer > Stopwatch >Continue.
2.To stop the clock, select Stop.
Options
The following options are available with the stopwatch: Continue, Show last time, Split timing, Lap timing, View times, and Delete times.
62
