BASIC FUNCTIONS

RECEIVING A CALL

APress any key except ON or the volume keys.

An incoming call is indicated by a ringing tone, and the CALL message flashing on the display.

If the SILENT SERVICE option (Menu 6) has been selected there will be no ringing tone; the keypad and display lights will flash instead, and only a short beep will be heard (refer to ‘Ringing volume (Menu 6)’, page 37).

If you do not answer a call, the CALL message will remain on the display (indicating a missed call); to clear the display, press any key.

‘Any-key answering’ facility: Any key (except ON or the volume keys) may be pressed to answer a call (except when ‘keyguard’ is active). If ‘keyguard’ is active, you must press the SEND key to answer the call. If you receive a call while entering a number, the call will be answered on the first keypress after the ringing starts.

BTo end the call, press END.

MAKING A CALL

A For best reception, pull the antenna up to extend fully. Do not leave the antenna partly extended.

B Open the keypad cover. Enter the number you wish to dial. Remember to include the area code (if this is necessary on your system) even if you are making a local call. The number will

be displayed.

CTo correct a mistake, press CLR to delete the last digit, or press and hold CLR to clear the whole display (then re-enter the number).

DPress SEND. The IN USE indicator will appear on the display, and the number will disappear when the call is connected.

ETo end the call, press END.

11

Page 15
Image 15
Nokia 239 manual Basic Functions, Receiving a Call, Making a Call