Nokia 282 owner manual Making a call, Extend the phone’s antenna fully, Connected when

Making a call

1Extend the phone’s antenna fully.

2Enter the area code (if needed) and the phone number, then press SEND. If you make a mistake dialing, press CLR to erase digits one by one. Press and hold CLR or press END to clear the whole display.

A phone symbol appears
on the display. The call is	CALL
connected when the
phone number disappears
from the display and CALL
appears.

For international calls: You can enter a ‘+’ at the beginning of a number by pressing !!. Then enter the country code and number, then press SEND. The ‘+’ expands to the international dialing code prefix.

To dial a number stored in the Phone Book: From the Ready screen press or until the Phone Book entry is displayed, then press SEND.

To make an emergency call: See "Emergency Calls" on page 75.

NO SERVICE appears and the phone beeps if you try to make a call when your phone is outside the cellular service area.

CALL NOT ALLOWED appears if you try to make a call that is restricted (see “Allowed Calls (Menu 5 1 2)” on page 45), or the phone is locked.

If you receive a call when you’re trying to make a call, the incoming call comes through and the outgoing call is cancelled.

NORMAL POSITION: Hold the phone as you would any other telephone, with the antenna pointed up and over your shoulder.

13

The Basics