Nokia 3595 manual Set up the loopset profile, Set up the TTY/TDD profile

Set up the loopset profile

The LPS-3 loopset gives people with T-coil equipped hearing aids the ability to make and receive calls without noise interference.

Important: Refer to the booklet that comes with the LPS-3 for complete instructions and safety information.

1Plug the loopset plug into the jack in the bottom of the phone, as shown in the illustration.

2Press Menu 4-7-3 (Settings > Accessory settings > Loopset).

3Scroll to Use loopset, then press Select.

4Scroll to Yes, then press Select.

Note: If you want to use the headset or TTY,

you perform steps 2-3, then select No to deactivate the loopset profile.

Set up the TTY/TDD profile

You can connect your phone to a TTY/TDD using the Nokia TTY/TDD Adapter (HDA- 9). In order for your phone to recognize the TTY/TDD, you’ll need to set up the TTY/ TDD profile, under Accessory settings.

Important: Some manufacturers of TTY/TDD devices suggest that the phone be least 18 inches from the TTY/TDD device. Remember that when connecting to any other device, read its user guide or contact its manufacturer for detailed instructions and safety information.

Nokia 3595 User Guide 71 Copyright © 2003 Nokia