Note: It may not be necessary to have three NAMs for your phone if your service provider has service or roaming agreements for each area in which you wish to use your phone. Contact your service provider for details.
Selecting the NAM for your phone
Press Menu 4 4 6 (Settings - Network services - NAM
selection), highlight the phone number you want to use and press OK.
Note: You need at least one active number to make calls. You can not change from one NAM to another during a call.
Network feature setting
Call forwarding (page 21), Call waiting (page 24) and Send own number (page 62) are network services available through your service provider or dealer.
When you subscribe to any of these services, your service provider or dealer gives you a separate feature code to activate each service. Deactivation codes are used to deactivate each service.
Once you store the appropriate code in your phone, the service appears as a menu item. You can then use the menu to activate and deactivate these services.
Each time you use a feature that requires a feature code, that code is sent to the network to verify you’re using the correct feature code.
Note: If your phone has more than one phone number programmed, any feature codes stored will apply only to your primary phone number, or NAM 1.
See “NAM selection” on page 45 for details on NAM.
Storing codes
1.Press Menu 4 4 5 (Settings - Network services - Network feature setting)
2.At Feature Code:, enter the feature code or
deactivation code received from your dealer (e.g. ∗74, ∗740, etc.), press OK
46
