[ 50 ]
DIAL A NUMBER USING VOICE DIALING
Before using voice dialing, note that:
• Voice tags are not language dependent. They are dependent on the
speaker’s voice.
• Voice tags are sensitive to background noise. For best results, record
them and make calls in a quiet environment.
• When recording a voice tag or making a call by saying a voice tag,
hold the phone in the normal position near to your ear.
• Very short names are not accepted. Use long names and avoid similar
names for different numbers.
• Voice tags must be shorter than 2 seconds. Record them and make
calls in a quiet environment.
Note: You must say the name exactly as you said it when you
recorded it. This may be difficult in, for example a noisy environment
or during an emergency, so you should not rely solely upon voice
dialing in all circumstances.
1Press and hold Contacts (or Go to) selection key.
2When you hear several beeps and Please speak now appears, release
the button.
Note: If you have the optional headset attached, press and hold
the headset button. When the phone beeps and Please speak now
appears, release the button.
3Pronounce the voice tag clearly into the microphone. When the phone
finds the voice tag, Found appears, and the phone automatically dials
the number.
If the phone does not locate a number or recognize the voice tag,
No match found appears.
If you are using the headset and the phone does not locate the number
or recognize the voice tag, you will hear an error tone and No match
found appears. To start voice dialing again, press and hold the headset
button immediately after the error tone.