Nokia 6200 Automate voice mail, Write Down Some Information, Learn HOW to Insert Dialing Codes

•Press Menu 01-3-1 (Messages > Voice messages > Listen to voice messages). After a brief pause, your phone dials the voice mail number.

Once you connect and the prerecorded greeting begins, follow the automated instructions to listen to your voice messages.

Automate voice mail

You can insert special characters called “dialing codes” into phone numbers such as voice mail and then save the number to a 1-touch dialing location. Dialing codes instruct the receiving system to pause, wait, bypass, or accept the numbers that follow them in the dialing string.

Note: Each voice mail service can vary. The examples and steps that follow are for clarification. Check with your wireless provider if you have specific questions about your voice mail service.

WRITE DOWN SOME INFORMATION

1Write down your voice mailbox number.

2Call and check your voice mail as you normally would.

3Write down your step-by-step interaction with the recorded prompts.

Keep in mind that each voice mail service may vary. However, it should look something like this:

Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, press pound key.

Important: Be precise. You will need this information in “Setup voice mail with dialing codes” later in this section.

LEARN HOW TO INSERT DIALING CODES

Press s repeatedly to cycle through dialing codes. Once the desired code appears in the display, pause briefly and the code is inserted into the dialing string.

For example, press s four times to display the “w” (wait character). Pause briefly and the wait character is inserted into the dialing string. Available dialing codes are as follows:

[ 70 ]