[ 71 ]
Menu functions
Setup voice mail with dialing codes
1At the Start screen, press Contacts, scroll to 1-touch dialing, and
press Select.
2Scroll to an empty 1-touch dialing slot and press Assign.
3Enter your voice mailbox number, including the area code.
4Refer to the dialing codes table on page 70 and enter any codes as
necessary using the information that you wrote down earlier.
For example, if you pause for 5 seconds after connecting to voice mail,
enter p twice after the voice mailbox number, such as 2145551212pp.
5Enter any remaining pauses, PIN codes, and other information that
allows you to listen to your messages, then press OK.
6Enter a name (such as Voice mail) and press OK. A message appears
in the display confirming your 1-touch dialing location has been saved.
Now, to dial and listen to your voice mail, just press and hold the
assigned 1-touch dialing key at the Start screen. No other keypresses
should be necessary to connect and listen to your messages.
• MESSAGE OPTIONS
Some or all of the options in the following table are available for text
messages, picture messages, multimedia messages, and e-mail.
1While viewing a text, picture, multimedia message, or e-mail
press Options.
*Bypasses a set of instructions.
+Precedes an international telephone number.
pPauses for 2.5 seconds before sending any numbers that follow.
wWait. Your phone waits for you to press h before it sends any
numbers or codes that follow.